Fechar 
Clique nas imagens para ampliar.
Medal has a complete line of aluminum gear pumps available .The basic components of our Aluminum Gear Pump consist of a gear set supported by two aluminum bushings, a body, a securing flange and a cover.
The shaft of the driving gear projecting beyond the flange mounts a seal ring coupled with a metallic ring to strengthen the setup. Both rings are held in place by an elastic securing ring.
The body of an Aluminum Gear Pump is made of a special aluminum and Cast Iron alloy with high strength for minimized deformation even when subject to high pressure.
Flange and cover are made out of cast iron or aluminum alloy, depending on the model series type, manufactured through a process of continuous flow casting and with a final surface treatment of phosphating.
Gears are made of special grade steel. Their manufacturing process includes case-hardening and quench hardening. The Aluminum Gear Pump gears are ground and fine finished to achieve a high degree of surface finishing. Good tooth profile design and geometric proportions ensure low pulsation levels and low noise levels during motor operation.Bushings are made of special low-friction and high-resistant aluminum alloy and manufactured from die-casting that have excellent high strength and anti-friction characteristics. Also equipped with anti-friction DU bearings with tight tolerance.
Medals Aluminum Gear Pump are designed to maximize life, efficiency, and minimize noise. Medal Aluminum gear pump are tested with oil at 100% load to guarantee their high performance, and subject to a thorough cleaning process to ensure very low contamination levels.Medal is specialized in aluminum Gear pump from Group2 to Group 3, divided in 23 displacement from 02 to 60 cc/rev , and up to 280bars.
- Followings are our main products：
- * Bushing series MD11